|
|||||||
| BackTrack 4 NON working hardware Report non working hardware. INCLUDE LINKS TO DRIVERS! |
 |
|
|
LinkBack | Thread Tools | Display Modes |
06-25-2009, 09:56 PM
|
||||
|
||||
Intel 5100 injection problem
Hi, I have bt4 prefinal
I try injection test on my Intel 5100 I set wlan0 on mode monitor then airmon-ng start wlan0 > mon0 I use alfa (rtl8187) for test > mon1 Injection with intel 5100 in mode -2 -3 -4 -6 -5 -7 failed Code:
aireplay-ng -9 mon0 -i mon1 For information, no action required: Using gettimeofday() instead of /dev/rtc 20:40:00 Trying broadcast probe requests... 20:40:00 Injection is working! 20:40:01 Found 1 AP 20:40:01 Trying directed probe requests... 20:40:01 00:18:39:AA:79:56 - channel: 11 - 'K world' 20:40:02 Ping (min/avg/max): 1.360ms/37.143ms/40.855ms Power: 223.23 20:40:02 30/30: 100% 20:40:02 Trying card-to-card injection... 20:40:03 Attack -0: OK 20:40:03 Attack -1 (open): OK 20:40:03 Attack -1 (psk): OK 20:40:07 Attack -2/-3/-4/-6: Failed 20:40:11 Attack -5/-7: Failed Code:
aireplay-ng -9 mon1 -i mon0 For information, no action required: Using gettimeofday() instead of /dev/rtc 20:39:42 Trying broadcast probe requests... 20:39:42 Injection is working! 20:39:44 Found 1 AP 20:39:44 Trying directed probe requests... 20:39:44 00:18:39:AA:79:56 - channel: 11 - 'K world' 20:39:46 Ping (min/avg/max): 1.081ms/83.327ms/106.955ms Power: 233.87 20:39:46 30/30: 100% 20:39:46 Trying card-to-card injection... 20:39:46 Attack -0: OK 20:39:46 Attack -1 (open): OK 20:39:46 Attack -1 (psk): OK 20:39:46 Attack -2/-3/-4/-6: OK 20:39:46 Attack -5/-7: OK 
|
|
06-26-2009, 01:40 AM
|
||||
|
||||
|
Quote:
 anyway, patch doesn't exist at the moment...btw. could you paste more info about your usb adapter please ? I'm going to buy one with the same chipset thx
|
|
06-26-2009, 04:08 PM
|
||||
|
||||
|
Quote:
 )
|
|
06-27-2009, 08:02 PM
|
|||
|
|||
|
[QUOTE=keeley;138936]Hi, I have bt4 prefinal
I try injection test on my Intel 5100 I set wlan0 on mode monitor then airmon-ng start wlan0 > mon0 I use alfa (rtl8187) for test > mon1 Injection with intel 5100 in mode -2 -3 -4 -6 -5 -7 failed Code:
aireplay-ng -9 mon0 -i mon1 For information, no action required: Using gettimeofday() instead of /dev/rtc 20:40:00 Trying broadcast probe requests... 20:40:00 Injection is working! 20:40:01 Found 1 AP 20:40:01 Trying directed probe requests... 20:40:01 00:18:39:AA:79:56 - channel: 11 - 'K world' 20:40:02 Ping (min/avg/max): 1.360ms/37.143ms/40.855ms Power: 223.23 20:40:02 30/30: 100% 20:40:02 Trying card-to-card injection... 20:40:03 Attack -0: OK 20:40:03 Attack -1 (open): OK 20:40:03 Attack -1 (psk): OK 20:40:07 Attack -2/-3/-4/-6: Failed 20:40:11 Attack -5/-7: Failed Code:
aireplay-ng -9 mon1 -i mon0 For information, no action required: Using gettimeofday() instead of /dev/rtc 20:39:42 Trying broadcast probe requests... 20:39:42 Injection is working! 20:39:44 Found 1 AP 20:39:44 Trying directed probe requests... 20:39:44 00:18:39:AA:79:56 - channel: 11 - 'K world' 20:39:46 Ping (min/avg/max): 1.081ms/83.327ms/106.955ms Power: 233.87 20:39:46 30/30: 100% 20:39:46 Trying card-to-card injection... 20:39:46 Attack -0: OK 20:39:46 Attack -1 (open): OK 20:39:46 Attack -1 (psk): OK 20:39:46 Attack -2/-3/-4/-6: OK 20:39:46 Attack -5/-7: OK type #aireplay-ng -9 -e <wireless network name> -a <ap mac address> mon0 or mon1
|
|
06-30-2009, 05:47 PM
|
|||
|
|||
|
misread the issue
Last edited by teh1337one; 06-30-2009 at 05:50 PM.
|
|
07-08-2009, 11:23 PM
|
|||
|
|||
|
5100 seems to be a fickle animal - injection on mine will work for 2 minutes then cease, and not work again until a reboot or two later. makes no sense. i've been trying to find a thread where someone used an alternate driver for it and claimed success, but cant seem to raise the bloody thing. will post back if i find it and it works
|
|
07-11-2009, 02:27 AM
|
|||
|
|||
|
has anyone found a working way to get packet injection working with the intel 5100 yet?
|
|
11-01-2009, 02:49 PM
|
||||
|
||||
Injection Intel WIFI 5100 AGN
intel 5100 BT4 recognises the card and if you start it with airmon-ng and check it with aireplay-ng -9 command it shows that the card is injecting. But this isnt very true (yes the card is injecting but only to a certian point then it stops,and only can go in monitor mode and listens to data but not injecting).. Every time i do a auth -1 with aireplay-ng on the AP the card stops injecting. After a lot of reading i finely got it workig and it is a simple solution.
by Hallucynogenyc http :// www .aircrack-ng. org / doku. php ? id = iwlagn jump to the compat wireless section (when choosing the version on the compat wireless webpage, select the first one (there's 30, 32 and 35 or similar, so the 30), I don't know if others work too but this one works for me 100%. it only works with "wlan0" and a really important thing about these intel cards is the distance... the distance really does affects the injection. Try to get the strongest signal befor injecting. Commands to run : First run BT4 from your Usb, HDD or whatever and put the .tar file in your home directory then open a console and : cd ~ tar xjf compat-wireless-2.6.tar.bz2 (asuming you have downloaded comapt-wireless form the link provided) cd compat-wireless-2009* make -j4 make unload (root) make install (root) echo options iwlagn swcrypto=1 >> /etc/modprobe.d/options (root) make load (root) You are set to go. Last edited by _DoS_; 11-09-2009 at 09:24 PM.
|
|
11-01-2009, 03:06 PM
|
|||
|
|||
|
I'm a little confues with thos directions... I downloadad the files but how do I place them in the home directory? I'm using a cd to boot into backtrack so how do I get the files from my os to this home directory you speak of?
__________________
Take what you can, Give nothing back!
|
|
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT. The time now is 07:11 AM.
