Remote Exploit Forums

Go Back   Remote Exploit Forums > Archives > Latest Public Release - BackTrack4 Beta > BT4beta Software Related Issues


BT4beta Software Related Issues Problems with BT4b pre-installed software only...

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 02-18-2009, 03:42 PM
Junior Member
 
Join Date: Jan 2009
Posts: 10
Question Wirleless

I know my wireless drivers are supported...but I don't know how to set it all up. Can anyone help?

Thanks!
Reply With Quote
  #2 (permalink)  
Old 02-18-2009, 04:13 PM
secure_it's Avatar
Senior Member
 
Join Date: Dec 2007
Location: 在後面之間|軌道4 & Fwd|軌道4
Posts: 861
Send a message via Yahoo to secure_it Send a message via Skype™ to secure_it
Default

No one is astrologist here who can predict which card you are using & always use sensible descriptive Title in post.let us know the chipset model and tell us the output of

iwconfig
ifconfig -a

if its mini pci-e or pci-e use
lspci
else if usb then
lsusb
__________________
Back|Track 4 Wiki Editor & Founder of Indian Cyber Army
0pen and free" d0es not mean "expl0ited and abused."


Centrino Core 2 Duo,250GB HDD,Geforce 9200 GS,4 Gigs RAM,Windows 7 Ultimate,Sun Solaris 10,BackTrack 4,2003 Server,2 Cisco ASA 5520 w/ security+,Cisco 7200 Series Adv. Security IOS 12.4T,Cisco NAC,Cisco IPS 4215 5.1,6.0,Cisco MARS,Cisco ACS 4.2,NetForensic Log Analyzer,Linksys WRT54G,2 Alfa AWUS036H 500 mW cards with 16 dBi Omni Antenna



Last edited by secure_it; 02-18-2009 at 04:16 PM.
Reply With Quote
  #3 (permalink)  
Old 02-18-2009, 04:21 PM
Junior Member
 
Join Date: Jan 2009
Posts: 10
Default

IWCONFIG:
root@bt:~# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

IFCONFIG -a:
eth0 Link encap:Ethernet HWaddr 00:23:ae:0d:ec:0a
inet addr: [MY IP HERE] Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::223:aeff:fe0d:ec0a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1
RX packets:7832 errors:0 dropped:0 overruns:0 frame:0
TX packets:6079 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:10074879 (10.0 MB) TX bytes:567533 (567.5 KB)
Interrupt:16

lo Link encap:Local Loopback
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:23 errors:0 dropped:0 overruns:0 frame:0
TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2995 (2.9 KB) TX bytes:2995 (2.9 KB)

--------------------------------------------------------------------------------------------------

I don't know what chipset I'm using, but I'm on a Dell i1525, here is the drivers link from the Dell website:

support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&Syste mID=INS_PNT_PM_1525&os=WLH&osl=en&catid=&impid=
Reply With Quote
  #4 (permalink)  
Old 02-18-2009, 05:19 PM
Member
 
Join Date: Mar 2008
Posts: 96
Default

lspci would probably give us a good idea of what wireless card you're using.

You just need to type
Code:
lspci
Reply With Quote
  #5 (permalink)  
Old 02-19-2009, 03:06 PM
Junior Member
 
Join Date: Jan 2009
Posts: 10
Default

lspci:

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
02:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
02:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
02:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12)
0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)

Last edited by nick43137; 02-20-2009 at 11:05 PM. Reason: Better
Reply With Quote
  #6 (permalink)  
Old 02-21-2009, 04:47 AM
Junior Member
 
Join Date: Oct 2007
Posts: 22
Default

Broadcom Corporation BCM4312 802.11b/g (rev 01). Thats your wireless chipset.

The card is supported by the B43 Module, not legacy, only downside is 802.11a is not supported.

Try opening a terminal window and doing the following:

Code:
rmmod b43legacy
modprobe b43

Once you have done that - do a:

Code:
 ifconfig -a
and see if wlan0 is listed as an interface.
Reply With Quote
  #7 (permalink)  
Old 02-21-2009, 11:32 AM
secure_it's Avatar
Senior Member
 
Join Date: Dec 2007
Location: 在後面之間|軌道4 & Fwd|軌道4
Posts: 861
Send a message via Yahoo to secure_it Send a message via Skype™ to secure_it
Default

I have doubt as this card is not supported cause it may have PCI ID 14e4:4315 which won't work with aircrack-ng suite and only can use as Ndiswrapper.I would like get the output of
lspci -nn
__________________
Back|Track 4 Wiki Editor & Founder of Indian Cyber Army
0pen and free" d0es not mean "expl0ited and abused."


Centrino Core 2 Duo,250GB HDD,Geforce 9200 GS,4 Gigs RAM,Windows 7 Ultimate,Sun Solaris 10,BackTrack 4,2003 Server,2 Cisco ASA 5520 w/ security+,Cisco 7200 Series Adv. Security IOS 12.4T,Cisco NAC,Cisco IPS 4215 5.1,6.0,Cisco MARS,Cisco ACS 4.2,NetForensic Log Analyzer,Linksys WRT54G,2 Alfa AWUS036H 500 mW cards with 16 dBi Omni Antenna


Reply With Quote
  #8 (permalink)  
Old 02-21-2009, 05:19 PM
Senior Member
 
Join Date: Aug 2007
Posts: 911
Default

ever bothered to check this?
http://wiki.remote-exploit.org/index...roadcom_owners
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 09:39 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.3.2