Remote Exploit Forums - Newbie Area http://forums.remote-exploit.org/ Welcome to the BackTrack Forums! Please check this section and post to it if you are new to BackTrack, the Forums, or both. en Sat, 21 Nov 2009 00:58:58 GMT vBulletin 60 http://forums.remote-exploit.org/images/backtrack4/misc/rss.jpg Remote Exploit Forums - Newbie Area http://forums.remote-exploit.org/ question about arp poison http://forums.remote-exploit.org/newbie-area/28898-question-about-arp-poison.html Fri, 20 Nov 2009 22:46:05 GMT Some dude who's an intern at my school, performed a mitm attack with arp poison on our school's network. Now suddenly his laptop crashed and shutted down. He wasnt able to successfully shut down ettercap and since then, the network acted crazy for like 3 weeks how is this possible that an arp poison causes trouble for 3 weeks, but he only ran the program for 5 minutes? ]]> Newbie Area Knuckles http://forums.remote-exploit.org/newbie-area/28898-question-about-arp-poison.html AFLA AWUS050NH wrong ARP linktype and network down http://forums.remote-exploit.org/newbie-area/28894-afla-awus050nh-wrong-arp-linktype-network-down.html Fri, 20 Nov 2009 20:44:54 GMT I have ALFA AWUS050NH usb adapter, and I'm following "How to Crack a Wi-Fi Network's WEP Password with BackTrack - wep - Lifehacker" (can't post url yet, but you can easily google it) , as author is using similar adapter.
I tried on both Backtrack 3, and 4 pre-release - it gives me same error. That's what's going on:

Code:
root@bt:~# /etc/init.d/networking start
Configuring network interfaces...eth1: ERROR while getting interface flags: No such device
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit #url#

SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
eth1: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth1.
eth2: ERROR while getting interface flags: No such device
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit #url#

SIOCSIFADDR: No such device
eth2: ERROR while getting interface flags: No such device
eth2: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth2.
ath0: ERROR while getting interface flags: No such device
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit #url#

SIOCSIFADDR: No such device
ath0: ERROR while getting interface flags: No such device
ath0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up ath0.
wlan0: ERROR while getting interface flags: No such device
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit #url#

SIOCSIFADDR: No such device
wlan0: ERROR while getting interface flags: No such device
wlan0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up wlan0.
done.
root@bt:~# airmon-ng


Interface      Chipset        Driver

ra0            Ralink 2560 PCI rt2500

root@bt:~# airmon-ng stop ra0


Interface      Chipset        Driver

ra0            Ralink 2560 PCI rt2500 (monitor mode disabled)

root@bt:~# ifconfig ra0 down
root@bt:~# macchanger --mac 00:11:22:33:44:55 ra0
Current MAC: 00:00:00:00:00:00 (Xerox Corporation)
Faked MAC:  00:11:22:33:44:55 (Cimsys Inc)
root@bt:~# airmon-ng start ra0


Found 1 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!

PID    Name
8811    dhclient3


Interface      Chipset        Driver

ra0            Ralink 2560 PCI rt2500 (monitor mode enabled)

root@bt:~# airodump-ng ra0
ioctl(SIOCSIWMODE) failed: Network is down

ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,
ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead.  Make
sure RFMON is enabled: run 'airmon-ng start ra0 <#>'
Sysfs injection support was not found either.

root@bt:~#
At this point I cannot follow tutorial anymore.
Here is my ifconfig result:
Code:
root@bt:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:26:18:08:c2:2d
          inet addr:10.0.0.12  Bcast:10.0.0.15  Mask:255.255.255.240
          inet6 addr: 2002:d4b4:aeb3:0:226:18ff:fe08:c22d/64 Scope:Global
          inet6 addr: fe80::226:18ff:fe08:c22d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1849 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1422 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1236237 (1.2 MB)  TX bytes:347780 (347.7 KB)
          Interrupt:28 Base address:0x2000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:66 errors:0 dropped:0 overruns:0 frame:0
          TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4076 (4.0 KB)  TX bytes:4076 (4.0 KB)
and iwconfig:

Code:
root@bt:~# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

ra0      RT2870 Wireless  ESSID:""  Nickname:""
          Mode:Auto  Frequency=2.412 GHz
          Link Quality=10/100  Signal level:0 dBm  Noise level:-143 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0  Missed beacon:0
and yes. I am noob ;)

tia for any help. ]]> Newbie Area MikePapa http://forums.remote-exploit.org/newbie-area/28894-afla-awus050nh-wrong-arp-linktype-network-down.html Please help me configure my wifi card. http://forums.remote-exploit.org/newbie-area/28897-please-help-me-configure-my-wifi-card.html Fri, 20 Nov 2009 18:24:41 GMT does anyone try to install this wirelles card Airlive wl 1600 usb on backtrack 3 and how? does anyone try to install this wirelles card Airlive wl 1600 usb
on backtrack 3 and how? ]]> Newbie Area Hunter007 http://forums.remote-exploit.org/newbie-area/28897-please-help-me-configure-my-wifi-card.html Dhcp relay http://forums.remote-exploit.org/newbie-area/28888-dhcp-relay.html Fri, 20 Nov 2009 15:52:08 GMT Hello to all.I have one problem and i post here ,maybe someone can help me. So, i have a linux server for providing internet to some clients.My... Hello to all.I have one problem and i post here ,maybe someone can help me.


So, i have a linux server for providing internet to some clients.My server have 3 network cards.eth0,eth1,eth2.


Eth0 it have the following configuration and it is my network link connection.It's primary and it have a public ip

193.231.100.134/30


Eth1 it have some alias interfaces ,something like eth1:0,eth1:1,etc

And this one is for lan ,for my clients.

And eth2 is not configured.

So ,my clients take ip from dhcp server,my linux server.


And my problem is that i have another linux server ,dhcp server.
This one it's not in the same subnet with the first one.

So i want to give ip trough dhcp for my clients from this server ,too.

How to set dhcprelay and if there is something else to do.Please help me.

Thanks. ]]> Newbie Area icedark http://forums.remote-exploit.org/newbie-area/28888-dhcp-relay.html Is it possible? http://forums.remote-exploit.org/newbie-area/28884-possible.html Fri, 20 Nov 2009 14:28:17 GMT Hi there! First of all I have to tell you that I am a noob. But only to WPA cracking, not in general. ;-) I have a bet running with my neighbor... Hi there!

First of all I have to tell you that I am a noob. But only to WPA cracking, not in general. ;-)

I have a bet running with my neighbor that I will penetrate his wifi security in less than 4 weeks and get 50 EUR for it.

Now I really wanna do that. Here is some information that I have gathered:
  • SSID is livebox_XXXX (where X stands for letter or number - it a generic router ssid). So I suggest no hash tables here?
  • WPA2
  • Password is supposed to be a generic one that's written on the bottom of the router. It is a pure 26 digit number password

Do you think there is a method of penetrating this network?

My PC is a Q6600 and I have a NVIDIA GeForce 8800 GTS (the second one).

I realize that just brute forcing the 26 digit password is impossible, so I need a penetration plan. :-)

Thank you very much for your time and input.

Regards

Xel.Ra

P.S.:
Please don't give me any advice like "Just break the windows and look up the number on the router."! :p ]]> Newbie Area Xel.Ra http://forums.remote-exploit.org/newbie-area/28884-possible.html Please help me configure my wifi card. http://forums.remote-exploit.org/newbie-area/28895-please-help-me-configure-my-wifi-card.html Fri, 20 Nov 2009 13:58:57 GMT Hello, How can I config the wifi card (edimax ew-7318usg) and connect to the internet with bt4? Hello,
How can I config the wifi card (edimax ew-7318usg) and connect to the internet with bt4? ]]> Newbie Area hezy00 http://forums.remote-exploit.org/newbie-area/28895-please-help-me-configure-my-wifi-card.html Help with where to start looking in to a vulnerability http://forums.remote-exploit.org/newbie-area/28877-help-where-start-looking-vulnerability.html Fri, 20 Nov 2009 11:33:56 GMT Hello All, first of if this is the wrong forum for my post apologies. Quick overview - a few backs I discovered a vulnerability in a remote... Hello All,
first of if this is the wrong forum for my post apologies. Quick overview - a few backs I discovered a vulnerability in a remote control gateway software my company was looking in to. It uses HTTP post request to transfer data between a client and a server via the gateway server. As the connection is not encrypted I found it was vulnerable to a pass-the-hash attack. While testing this I was using PAROS proxy I tried to do manual POST request and found I could reliably crash the gateway service. However I'm still trying to track down the actual issue. I believe it is down to a malformed header information in the request which crashes the gateway process. I've since moved to just using telnet as PAROS adds its own info into the header. I've reported this to the vendor who is looking in to it.

My questions are:

1) Can anyone recommend a HTTP post fuzzer?
2) While I know I can cause a DoS, can anyone recommend any links that I could read to understand if it is possible to take this further to attempt code execution

thanks in advance for any help ]]> Newbie Area watcher_60 http://forums.remote-exploit.org/newbie-area/28877-help-where-start-looking-vulnerability.html ifconfig rausb0 up freezes konsole http://forums.remote-exploit.org/newbie-area/28869-ifconfig-rausb0-up-freezes-konsole.html Fri, 20 Nov 2009 04:30:13 GMT i am running the rt73 drivers on bt3 vmware

i've ran this command several times and everything was good but now i type in the ifconfig rausb0 up command and nothing happens i've waited for it for like an hour and it doesnt do anything what could be the issue

thanks ]]> Newbie Area dutch85 http://forums.remote-exploit.org/newbie-area/28869-ifconfig-rausb0-up-freezes-konsole.html Some advice to the noob? http://forums.remote-exploit.org/newbie-area/28868-some-advice-noob.html Fri, 20 Nov 2009 04:24:41 GMT Hello all,

I'm new here. i have been struggling with figuring out some of the commands for things like aireplay-ng, airmon-ng, ect. i just wanted to share with other noobs. running (man aireplay-ng) in terminal and actually reading the description of the options really helped me understand and use this command. the (man) option works with many of these. i might suggest to try reading these man's before seeking help? just a thought. and thanks to everyone who answers posts. reading through what everyone else is struggling with helps alot. any other suggestions would be greatly appreciated. :) ]]> Newbie Area newtonfilinas http://forums.remote-exploit.org/newbie-area/28868-some-advice-noob.html Asus ux50v http://forums.remote-exploit.org/newbie-area/28864-asus-ux50v.html Fri, 20 Nov 2009 00:37:46 GMT The wifi is working great with this puter, but I need some help with getting the lan working. BT4 doesn't even "see" eth0. Any suggestions?

I have been trying for a while now to get backtrack 4 to "see" my eth0 but no matter what I do, it will not see it. If anyone can help please let me know. ]]> Newbie Area reduce http://forums.remote-exploit.org/newbie-area/28864-asus-ux50v.html problem with synaptic http://forums.remote-exploit.org/newbie-area/28862-problem-synaptic.html Thu, 19 Nov 2009 19:54:31 GMT hi every body i have installed bt4 bre-release i have the following problem when i tried to install any package it shows me the following msg ... hi every body
i have installed bt4 bre-release
i have the following problem when i tried to install any package
it shows me the following msg
Quote:
E: postgresql-8.3: subprocess post-installation script returned error exit status 1
E: postgresql: dependency problems - leaving unconfigured
]]> Newbie Area mesmar http://forums.remote-exploit.org/newbie-area/28862-problem-synaptic.html Wireless Hacking Live-CD (FBI version) http://forums.remote-exploit.org/newbie-area/28859-wireless-hacking-live-cd-fbi-version.html Thu, 19 Nov 2009 19:25:24 GMT I have Wireless Hacking Live-CD (FBI version) but iam new in hacking so want toturial or video for this CD. I have Wireless Hacking Live-CD (FBI version) but iam new in hacking so want toturial or video for this CD. ]]> Newbie Area kdk lgl http://forums.remote-exploit.org/newbie-area/28859-wireless-hacking-live-cd-fbi-version.html scapy -scripting problems http://forums.remote-exploit.org/newbie-area/28853-scapy-scripting-problems.html Thu, 19 Nov 2009 18:14:10 GMT here's my problem:

I'm using Ubuntu 9.10 with python2.5 and the latest version of Scapy..
If i start Scapy on the Terminal it works fine.
But trying to write a very easy script with python doesn't work:

from scapy import *
i = IP()

Traceback (most recent call last):
File "<stdin>", line 1, in <module>
NameError: name 'IP' is not defined

Do i have to manipulate any PATH var or something like that?
Would be nice if anybody could tell me whats the problem with this script or which steps i have to take before being able to script importing scapy? ]]> Newbie Area dextor http://forums.remote-exploit.org/newbie-area/28853-scapy-scripting-problems.html Help me connect a usb device in BT with VMWare http://forums.remote-exploit.org/newbie-area/28855-help-me-connect-usb-device-bt-vmware.html Thu, 19 Nov 2009 17:56:11 GMT :confused:hello people aqm quite new to backtrack and all these stuff and i had being trying on my own to figure this question out for more than 2... :confused:hello people aqm quite new to backtrack and all these stuff and i had being trying on my own to figure this question out for more than 2 weeks and i really need help here. i bought the VMware workstation and i have a live cd of backtrack.but whenever i power on my vmware the message i get at the bottom of the vmware while powering on is "Host usb device connection disabled.."The connection to the vmware USB arbitration service was unsuccessful,please check status of this service in microsoft management consol".what do i do, help



Quote:
Originally Posted by cliffyb1 (Post 108244)
I discovered this excellent post from f3lix @ techaccesstips.blogspot. It is very easy to follow and works perfectly. VMWare 6.5.1

Quote

1. Download the BT3 VM from remote-exploit and unzip.
2. Power on the VM and verify everything is working correctly.
3. Open up terminal and make a directory under /mnt called hdc
mkdir /mnt/hdc
4. Now go to the tool bar VM > Install VMware Tools.
5. Click Install and a window should appear saying that media has been detected. Select Open in New Window.
6. Drag and drop the VMwareTools-1.0.6-91891.i386.tar.gz file to your desktop or desired folder.
7. CD into the proper folder (in my case its Desktop).
8. Then untar the file.
tar xvzf VMwareTools-1.0.6-91891.i386.tar.gz
9. CD into the newly created vmware-tools-distrib folder.
10. Execute vmware-install.pl
11. Leave all the defaults, pressing enter at every prompt.
12. When completed, configure vmtools by executing vmware-config-tools.pl. Leave all the defaults. Then add the following start up script to the ~/.kde/Autostart directory (it will be hidden).
echo "/usr/bin/vmware-toolbox --minimize"> ~/.kde/Autostart/vmware-toolbox.sh
13. Press enter then make it executable
chmod +x ~/.kde/Autostart/vmware-toolbox.sh
14. Now restart your VM and the next time you boot you should be able to drag your mouse seamlessly within the BT VM and your native OS.
]]> Newbie Area ola_novice http://forums.remote-exploit.org/newbie-area/28855-help-me-connect-usb-device-bt-vmware.html RT2870 with BT3 http://forums.remote-exploit.org/newbie-area/28844-rt2870-bt3.html Thu, 19 Nov 2009 13:07:28 GMT try the guide referenced here:
[ubuntu] edimax usb wireless ew-7711 problem - Ubuntu Forums

I followed this. But it appears my card is still not being recognized

Im using BT3 this time with a RT2870 driver it's a EW-7711uan

Quote:
Quote:
bt ~ # wget
http://ubunturt2870.pbworks.com/f/20....2.0.0.tar.bz2
--11:33:41--
http://ubunturt2870.pbworks.com/f/20....2.0.0.tar.bz2
=> `2009_0820_RT2870_Linux_STA_V2.2.0.0.tar.bz2'
Resolving ubunturt2870.pbworks.com... 208.96.18.237, 208.96.18.238
Connecting to ubunturt2870.pbworks.com|208.96.18.237|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 584,289 (571K) [application/x-bz2]

100%[====================================>] 584,289 137.67K/s
ETA 00:00

11:33:48 (137.59 KB/s) - `2009_0820_RT2870_Linux_STA_V2.2.0.0.tar.bz2'
saved [584289/584289]

bt ~ # tar xvfj 2009_0820_RT2870_Linux_STA_V2.2.0.0.tar.bz2
2009_0820_RT2870_Linux_STA_V2.2.0.0/common/
2009_0820_RT2870_Linux_STA_V2.2.0.0/common/action.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/common/ba_action.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/common/br_ftph.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/common/client_wds.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/include/rtmp_timer.h
2009_0820_RT2870_Linux_STA_V2.2.0.0/include/rtmp_type.h
2009_0820_RT2870_Linux_STA_V2.2.0.0/include/rtusb_io.h
2009_0820_RT2870_Linux_STA_V2.2.0.0/include/rt_ate.h
2009_0820_RT2870_Linux_STA_V2.2.0.0/include/rt_config.h
2009_0820_RT2870_Linux_STA_V2.2.0.0/include/spectrum.h
2009_0820_RT2870_Linux_STA_V2.2.0.0/include/spectrum_def.h
2009_0820_RT2870_Linux_STA_V2.2.0.0/include/vr_ikans.h
2009_0820_RT2870_Linux_STA_V2.2.0.0/include/wpa.h
2009_0820_RT2870_Linux_STA_V2.2.0.0/include/wpa_cmm.h
2009_0820_RT2870_Linux_STA_V2.2.0.0/iwpriv_usage.txt
2009_0820_RT2870_Linux_STA_V2.2.0.0/Makefile
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/config.mk
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/Makefile.4
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/Makefile.6
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/Module.symvers
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/modules.order
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/rt_ate.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/rt_linux.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/rt_main_dev.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/rt_profile.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/rt_usb.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/sta_ioctl.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/usb_main_dev.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/vr_ikans.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/README_STA
2009_0820_RT2870_Linux_STA_V2.2.0.0/RT2870STA.dat
2009_0820_RT2870_Linux_STA_V2.2.0.0/RT2870STACard.dat
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta/
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta/assoc.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta/auth.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta/auth_rsp.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta/connect.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta/dls.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta/rtmp_ckipmic.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta/rtmp_data.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta/sanity.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta/sync.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta/wpa.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/sta_ate_iwpriv_usage.txt
2009_0820_RT2870_Linux_STA_V2.2.0.0/tools/
2009_0820_RT2870_Linux_STA_V2.2.0.0/tools/bin2h
2009_0820_RT2870_Linux_STA_V2.2.0.0/tools/bin2h.c
2009_0820_RT2870_Linux_STA_V2.2.0.0/tools/Makefile
bt ~ # cd 2009_0820_RT2870_Linux_STA_V2.2.0.0
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 #
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 #
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 # cd os/linux
bt linux #
bt linux # rm config.mk
bt linux #
bt linux # wget http://ubunturt2870.pbwiki.com/f/config.mk
--11:34:26-- http://ubunturt2870.pbwiki.com/f/config.mk
=> `config.mk'
Resolving ubunturt2870.pbwiki.com... 208.96.32.2, 208.96.32.3
Connecting to ubunturt2870.pbwiki.com|208.96.32.2|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://ubunturt2870.pbworks.com/f/config.mk [following]
--11:34:27-- http://ubunturt2870.pbworks.com/f/config.mk
=> `config.mk'
Resolving ubunturt2870.pbworks.com... 208.96.18.238, 208.96.18.237
Connecting to ubunturt2870.pbworks.com|208.96.18.238|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 10,760 (11K) [application/x-mk]

100%[====================================>] 10,760 --.--K/s

11:34:28 (128.87 MB/s) - `config.mk' saved [10760/10760]

bt linux # cd 2009_0820_RT2870_Linux_STA_V2.2.0.0
-bash: cd: 2009_0820_RT2870_Linux_STA_V2.2.0.0: No such file or directory
bt linux # cd /root/2009_0820_RT2870_Linux_STA_V2.2.0.0
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 # sudo make
make -C tools
make[1]: Entering directory `/root/2009_0820_RT2870_Linux_STA_V2.2.0.0/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/root/2009_0820_RT2870_Linux_STA_V2.2.0.0/tools'
/root/2009_0820_RT2870_Linux_STA_V2.2.0.0/tools/bin2h
cp -f os/linux/Makefile.6
/root/2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux/Makefile
make -C /lib/modules/2.6.21.5/build
SUBDIRS=/root/2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux modules
make: *** /lib/modules/2.6.21.5/build: No such file or directory. Stop.
make: *** [LINUX] Error 2
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 #
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 # sudo make install
make -C /root/2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux -f
Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory
`/root/2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
cp /root/2009_0820_RT2870_Linux_STA_V2.2.0.0/RT2870STA.dat
/etc/Wireless/RT2870STA/.
install -d /lib/modules/2.6.21.5/kernel/drivers/net/wireless/
install -m 644 -c rt2870sta.ko
/lib/modules/2.6.21.5/kernel/drivers/net/wireless/
install: cannot stat `rt2870sta.ko': No such file or directory
make[1]: *** [install] Error 1
make[1]: Leaving directory
`/root/2009_0820_RT2870_Linux_STA_V2.2.0.0/os/linux'
make: *** [install] Error 2
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 #
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 # sudo modprobe rt2870sta
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 #
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 # sudo modprobe -r rt2870sta
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 # sudo modprobe rt2870sta
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 # sudo ifconfig ra0 up
ra0: ERROR while getting interface flags: No such device
bt 2009_0820_RT2870_Linux_STA_V2.2.0.0 #
If i type iwconig i get


Quote:
bt ~ # sudo ifconfig ra0 down
ra0: ERROR while getting interface flags: No such device
bt ~ # iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

bt ~ #

Anyone have this problem before?

Has anyone got the rt2870 working with BT3? ]]> Newbie Area coubury http://forums.remote-exploit.org/newbie-area/28844-rt2870-bt3.html