Remote Exploit Forums - BackTrack 4 (pre) Final http://forums.remote-exploit.org/ BackTrack 4 (pre) Final Forums en Sat, 21 Nov 2009 08:41:37 GMT vBulletin 60 http://forums.remote-exploit.org/images/backtrack4/misc/rss.jpg Remote Exploit Forums - BackTrack 4 (pre) Final http://forums.remote-exploit.org/ Someone teach me basic networking for linux http://forums.remote-exploit.org/backtrack-4-pre-final/28899-someone-teach-me-basic-networking-linux.html Fri, 20 Nov 2009 22:57:15 GMT i just installed bt4 pre final and every thing is okay im now trying to edit my mac address from terminal with # ifconfig eth0 down #... i just installed bt4 pre final and every thing is okay

im now trying to edit my mac address from terminal with

# ifconfig eth0 down
# ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
# ifconfig eth0 up
# ifconfig eth0 |grep HWaddr

and its okay now for ip and netmask

ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up

and its okay now for gateway

route add default gw 1.1.2.2 eth0


and last thing i edited resolv.conf with nano to add DNS

#nano /etc/resolv.conf

and i added 2 lines

DNS1 xxx.xxx.xxx.xxx
DNS2 xxx.xxx.xxx.xxx


and now for use browsing but first i tried to ping google with


ping google.com

or ping yaho.com

it gives Unknown host

and when i open firefox it gives failed no connection

plz help why :S:S:S ]]> BackTrack 4 (pre) Final rebrov http://forums.remote-exploit.org/backtrack-4-pre-final/28899-someone-teach-me-basic-networking-linux.html Backtrack 4 startup programs. http://forums.remote-exploit.org/backtrack-4-pre-final/28763-backtrack-4-startup-programs.html Mon, 16 Nov 2009 22:10:22 GMT Hello , i am almost new to backtrack and i have a "common" question.
How to i make some programs start at startup?
I have made a script which i want to start at startup.

Thanks in advance ,

silvester

--------------------------------------------------------------------
I have been googling for about 2 hours... ]]> BackTrack 4 (pre) Final silvester http://forums.remote-exploit.org/backtrack-4-pre-final/28763-backtrack-4-startup-programs.html Rokland Raid Wireless Troubles http://forums.remote-exploit.org/backtrack-4-pre-final/28751-rokland-raid-wireless-troubles.html Mon, 16 Nov 2009 14:16:01 GMT So Ive spent a few days now trying to find a solution to my wireless problem to no avail. Ive got the Rockland raid USB dongle that was based off... So Ive spent a few days now trying to find a solution to my wireless problem to no avail.

Ive got the Rockland raid USB dongle that was based off alfa AWUS038S. When I start Backtrack 4 and run
Code:
ifconfig ra0 up
/etc/init.d/wicd start
Im able to connect to the internet.

However trying to work in monitor mode Im unable to see any access points. Ive tried to search for this issue, but unfortunetly I am not getting any errors to search for. Everything seems like it should be working and isnt. Relavant information on what Ive been doing to try and work in monitor mode below.

Code:
root@backtrack:~# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

ra0      RT2870 Wireless  ESSID:""  Nickname:"RT2870STA"
          Mode:Monitor  Frequency=2.457 GHz  Access Point: Not-Associated
          Bit Rate:1 Mb/s
          RTS thr:off  Fragment thr:off
          Encryption key:off
          Link Quality=100/100  Signal level:0 dBm  Noise level:-97 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0  Missed beacon:0
Code:
root@backtrack:~# airmon-ng start ra0


Interface      Chipset        Driver

ra0            Ralink 2560 PCI rt2500 (monitor mode enabled)

Code:
root@backtrack:~# aireplay-ng -9 ra0
06:47:45  Trying broadcast probe requests...
06:47:47  No Answer...
06:47:47  Found 0 APs
kismet and airodump-ng also do not show any access points.

If anyone has had similar issues, or as any idea of what the problem is and can point me into the direction of what I should be searching for I would appreciate it.

Also after bringing it into monitor mode, I am unable to bring it down, set mode to managed bring it up, and restart wicd and connect. I have to reboot the machine to get it working again. ]]> BackTrack 4 (pre) Final stdio http://forums.remote-exploit.org/backtrack-4-pre-final/28751-rokland-raid-wireless-troubles.html persistent BackTrack 4 http://forums.remote-exploit.org/backtrack-4-pre-final/28670-persistent-backtrack-4-a.html Fri, 13 Nov 2009 17:33:41 GMT Hi, In a nutshell, persistent BackTrack 4 (BT4) will work if using a casper-rw named partition or a casper-rw named loop file. However, I am... Hi,

In a nutshell, persistent BackTrack 4 (BT4) will work if using a casper-rw named partition or a casper-rw named loop file.

However, I am not able to make the loop file option work. Any one can help?

Refs:

steps that I followed to create the persistent loop file:
Linux Tips: Create a larger casper-rw loop file for your live usb from Linux
blog.dipinkrishna.info/2009/11/create-larger-casper-rw-loop-file-for.html

Posts that related to my question (but no answer)
http forums.remote-exploit.org/backtrack-4-general-support/28397-persistent-cd.html
http forums.remote-exploit.org/discussioni-generali/28430-installare-backtrack-4-persistent-mode-su-chiavetta-usb.html
http forums.remote-exploit.org/backtrack-4-howto/23652-bt4-usb-installation-noob-proof-tutorial.html

and
http forums.remote-exploit.org/search.php?searchid=4680653
(Search: Keyword(s): persistent casper )

Please help.

*EDIT*: PS, I'm experienced Debian user, and not too sure how the versioning works in Ubuntu. I mean, since BT4 is based on a old version of Ubuntu, how current is casper? Is there any online man page for the version of specific casper that BT4 uese?

thanks
sfxpt ]]> BackTrack 4 (pre) Final sfxpt http://forums.remote-exploit.org/backtrack-4-pre-final/28670-persistent-backtrack-4-a.html Please teach me to get my wireless card working. http://forums.remote-exploit.org/backtrack-4-pre-final/28668-please-teach-me-get-my-wireless-card-working.html Fri, 13 Nov 2009 13:07:12 GMT hey can somebody tell me how to get my wireless card working it uses rt2870 chipset but the wireless tool says no wireless devices found what i need... hey can somebody tell me how to get my wireless card working it uses rt2870 chipset but the wireless tool says no wireless devices found what i need to do.for your info i'm complete newbie with linux just before half an hour i installed it so if anybody can help me i'll be very grateful just do not tell there's no way to get it working forums.remote-exploit.org/newbie-area/21752-rt2870-works-bt3-but-not-bt4.html ]]> BackTrack 4 (pre) Final tanago http://forums.remote-exploit.org/backtrack-4-pre-final/28668-please-teach-me-get-my-wireless-card-working.html WifiZoo 1.3 and Scapy 2.x http://forums.remote-exploit.org/backtrack-4-pre-final/28638-wifizoo-1-3-scapy-2-x.html Thu, 12 Nov 2009 15:56:54 GMT Has any one got Wifizoo 1.3 to work with scapy 2.x? Im getting errors when im trying to run it! (i will post errors shortly):) I heard there... Has any one got Wifizoo 1.3 to work with scapy 2.x?

Im getting errors when im trying to run it!
(i will post errors shortly):)

I heard there is a wifizoo 1.4 evolution version. where could i download it? ]]> BackTrack 4 (pre) Final joker5bb http://forums.remote-exploit.org/backtrack-4-pre-final/28638-wifizoo-1-3-scapy-2-x.html Pico E-12 /Openciphers http://forums.remote-exploit.org/backtrack-4-pre-final/28568-pico-e-12-openciphers.html Tue, 10 Nov 2009 21:59:42 GMT Hello. Upon reading the release notes for Backtrack 4, I noticed that support was included for the Pico FPGA via the OpenCiphers project. I have... Hello. Upon reading the release notes for Backtrack 4, I noticed that support was included for the Pico FPGA via the OpenCiphers project. I have downloaded and installed Backtrack 4 (pre)Final and am not able to find anything indicating that this card is supported. Could not find the module pico_e12.ko, modified coWPAtty or anything similar. I did manage to find an arcive of .deb packages with an open-ciphers.deb package but have not tried to install.

Any information you can provide me regarding the support of the Pico FPGAs would be greatly appreciated.

Thank you for your time.

Regards. ]]> BackTrack 4 (pre) Final spotswoode http://forums.remote-exploit.org/backtrack-4-pre-final/28568-pico-e-12-openciphers.html meterpreter connection? http://forums.remote-exploit.org/backtrack-4-pre-final/28555-meterpreter-connection.html Tue, 10 Nov 2009 18:07:11 GMT will meterpreter/reverse tcp work if both the attacker and the victim are behind a different NAT with only local ip's or for example does the attacker have to be directly connected so he has his own public ip for the reverse connection to take place?

also will making LPORT 8080 make a difference? ]]> BackTrack 4 (pre) Final seankilla http://forums.remote-exploit.org/backtrack-4-pre-final/28555-meterpreter-connection.html 2.6.30.7 error http://forums.remote-exploit.org/backtrack-4-pre-final/28537-2-6-30-7-error.html Tue, 10 Nov 2009 04:58:33 GMT Trying to update to the latest image and I keep on getting the following error. When I reboot Grub does not show the new image? Still shows 2.6.30.5.... Trying to update to the latest image and I keep on getting the following error. When I reboot Grub does not show the new image? Still shows 2.6.30.5. I checked the Grub menu lst and do not see the new image?

dpkg -i --force-all linux-image-2.6.30.7_2.6.30.7-10.00.Custom_i386.deb
(Reading database ... 200688 files and directories currently installed.)
Preparing to replace linux-image-2.6.30.7 2.6.30.7-10.00.Custom (using linux-image-2.6.30.7_2.6.30.7-10.00.Custom_i386.deb) ...
Done.
Unpacking replacement linux-image-2.6.30.7 ...
Running postrm hook script /sbin/update-grub.
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... found: /boot/grub/splash.xpm.gz
Found kernel: /boot/vmlinuz-2.6.30.7
Found kernel: /boot/vmlinuz-2.6.30.5
Found kernel: /boot/vmlinuz-2.6.29.4
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done

Setting up linux-image-2.6.30.7 (2.6.30.7-10.00.Custom) ...

Hmm. There is a symbolic link /lib/modules/2.6.30.7/build
However, I can not read it: No such file or directory
Therefore, I am deleting /lib/modules/2.6.30.7/build


Hmm. The package shipped with a symbolic link /lib/modules/2.6.30.7/source
However, I can not read the target: No such file or directory
Therefore, I am deleting /lib/modules/2.6.30.7/source

Running depmod.
Finding valid ramdisk creators.
Using mkinitramfs-kpkg to build the ramdisk.
Not updating initrd symbolic links since we are being updated/reinstalled
(2.6.30.7-10.00.Custom was configured last, according to dpkg)
Not updating image symbolic links since we are being updated/reinstalled
(2.6.30.7-10.00.Custom was configured last, according to dpkg)
Running postinst hook script update-grub.
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... found: /boot/grub/splash.xpm.gz
Found kernel: /boot/vmlinuz-2.6.30.7
Found kernel: /boot/vmlinuz-2.6.30.5
Found kernel: /boot/vmlinuz-2.6.29.4
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done ]]> BackTrack 4 (pre) Final iceman_3233 http://forums.remote-exploit.org/backtrack-4-pre-final/28537-2-6-30-7-error.html pyrit passthrough cowpatty http://forums.remote-exploit.org/backtrack-4-pre-final/28362-pyrit-passthrough-cowpatty.html Wed, 04 Nov 2009 04:54:27 GMT Im not making a poll but I wonder which is better: pyrit passthrough cowpatty?; airolib?; pyrit batch? in my case ---Quote--- pyrit... Im not making a poll

but I wonder which is better: pyrit passthrough cowpatty?; airolib?; pyrit batch?

in my case
Quote:
pyrit passthrough cowpatty = 820,000 1 hour
Quote:
airolib = 66 PMK's
Quote:
pyrit batch = 266 PMK's
what's with the pyrit passthrough cowpatty and this benefits ]]> BackTrack 4 (pre) Final manulu http://forums.remote-exploit.org/backtrack-4-pre-final/28362-pyrit-passthrough-cowpatty.html creating a vpn with backtrack4? http://forums.remote-exploit.org/backtrack-4-pre-final/28293-creating-vpn-backtrack4.html Mon, 02 Nov 2009 03:01:40 GMT can someone shed some knowledge on the topic of setting up/establishing a vpn from lets say a bt4 machine to a windows comp on a different network ... can someone shed some knowledge on the topic of setting up/establishing a vpn from lets say a bt4 machine to a windows comp on a different network

if someone can just give me some ideas so that i can research into it that would be great!! thanks. ]]> BackTrack 4 (pre) Final seankilla http://forums.remote-exploit.org/backtrack-4-pre-final/28293-creating-vpn-backtrack4.html some airpwn questions *bit of a task to get wificard in proper mode http://forums.remote-exploit.org/backtrack-4-pre-final/28278-some-airpwn-questions-bit-task-get-wificard-proper-mode.html Sun, 01 Nov 2009 19:12:03 GMT when i use airpwn i normally go into the order open network manager for rausb0 (light must blink) iwconfig rausb0 mode monitor airodump-ng -c 11... when i use airpwn i normally go into the order

open network manager for rausb0 (light must blink)
iwconfig rausb0 mode monitor
airodump-ng -c 11 rausb0
run airpwn

sometimes it works by just doing
ifconfig rausb0 up
iwconfig rausb0 mode monitor
airodump-ng -c 11 rausb0 <- im guessing just to get the wificard on the channel i want
airpwn


is there a better way to do all this? sometimes it seems the wificard doesn't allow broadcasting (i thought in monitor mode it shouldnt be capable of broadcasting)


im doing demo at my college and they have subnets for each wireless client.. so mitm doesnt work ]]> BackTrack 4 (pre) Final thefatmoop http://forums.remote-exploit.org/backtrack-4-pre-final/28278-some-airpwn-questions-bit-task-get-wificard-proper-mode.html Injection problem ipw3945 rtl8187 ar9285 http://forums.remote-exploit.org/backtrack-4-pre-final/28269-injection-problem-ipw3945-rtl8187-ar9285.html Sun, 01 Nov 2009 08:23:03 GMT Hello all, I have tried those three cards (ipw3945 rtl8187 ar9285) installed on diferent laptops ,and i had he same problem injecting.I tryed... Hello all,
I have tried those three cards (ipw3945 rtl8187 ar9285) installed on diferent laptops ,and i had he same problem injecting.I tryed BT4pre ,and BT4 beta,with exact same resolts.

i get this img248.imageshack.us/img248/5274/snapshot4.jpg

all seems to work properly but i get no ARP and ACKs,and no data.
the commands i used are:
#airmon-ng
#airodump-ng wlan0
#airodump-ng -w wep -c channel --bssid bssid wlan0
#aireplay-ng -1 0 -a bbsid wlan0
#aireplay-ng -3 -b bssid wlan0

i tryed #airmon-ng start wlan0
and then use mon0 instead of wlan0 ,but got the same exact resolts.generally i never got a error message,but never got any AVR and ACKs,Data never start going fast,thow as you can see in image i have 4800+ packets read.What am i doing wrong?Any help would be appreciated,thx in advaced. ]]> BackTrack 4 (pre) Final Wolverin http://forums.remote-exploit.org/backtrack-4-pre-final/28269-injection-problem-ipw3945-rtl8187-ar9285.html Bringing Up eth0??? http://forums.remote-exploit.org/backtrack-4-pre-final/28239-bringing-up-eth0.html Sat, 31 Oct 2009 16:47:07 GMT I am feeling mighty dumb right now. When I try: ifconfig eth0 up I am getting permission denied. I tried the password I assigned to me as user... I am feeling mighty dumb right now.

When I try: ifconfig eth0 up
I am getting permission denied.

I tried the password I assigned to me as user as well as toor with no luck!

Help!!!

Ray ]]> BackTrack 4 (pre) Final rayj00 http://forums.remote-exploit.org/backtrack-4-pre-final/28239-bringing-up-eth0.html how to access windows 7 shared folder from backtrack pf4 http://forums.remote-exploit.org/backtrack-4-pre-final/28213-how-access-windows-7-shared-folder-backtrack-pf4.html Fri, 30 Oct 2009 23:54:00 GMT I'm having file sharing issues between Windows 7 and Back|Track. My primary O.S. is Back|Track pf4 dual boot with W7 also; but im trying share some files between my wife's W7 pc.

can someone enlighten me
thanks

F.Y.I. Im the owner of the network also I know each of my pc's share password. just in case

that's my case im trying to boot into W7 to snapshot from there
http://i189.photobucket.com/albums/z...8BackTrack.png ]]> BackTrack 4 (pre) Final manulu http://forums.remote-exploit.org/backtrack-4-pre-final/28213-how-access-windows-7-shared-folder-backtrack-pf4.html