Remote Exploit Forums - BackTrack 4 NON working hardware http://forums.remote-exploit.org/ Report non working hardware. INCLUDE LINKS TO DRIVERS! en Sat, 21 Nov 2009 02:42:59 GMT vBulletin 60 http://forums.remote-exploit.org/images/backtrack4/misc/rss.jpg Remote Exploit Forums - BackTrack 4 NON working hardware http://forums.remote-exploit.org/ Realtek RTL8192E Wi-Fi Card http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28834-realtek-rtl8192e-wi-fi-card.html Thu, 19 Nov 2009 07:01:48 GMT I have Realtek RTL8192E integrated wifi card on my laptop but i couldn't find a way to run it on any linux distribution for wep/wpa hack. Simply, i can only use ndiswrapper but it doesn't allow monitor mode.

Is there anybody that publish a driver of this card for linux?

I really need this driver. ]]> BackTrack 4 NON working hardware slayerns http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28834-realtek-rtl8192e-wi-fi-card.html Alfa AWUS050NH rt2870 injection/monitor driver for BT4 pre final http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28588-alfa-awus050nh-rt2870-injection-monitor-driver-bt4-pre-final.html Wed, 11 Nov 2009 10:43:22 GMT Hi, this is my first post on this forum and I hope it will turn out to be a clean one :D First of all I would like to alert the mods that I have... Hi, this is my first post on this forum and I hope it will turn out to be a clean one :D

First of all I would like to alert the mods that I have searched the forum, read everything and even tried everything before posting here.

I have purchased an Alfa AWUS050NH which was recommended by a friend as a good injection / monitor usb card for BT4. What I noticed from previous threads, a hackish solution with custom drivers works for BT4beta.

I tried to apply it to BT4pre final (with apocolipse and official drivers) with no luck. It seems the new kernel present in the prefinal wont allow the cooked drivers.

I have also seen mixed posts about how you can use rt2800usb and rt2870sta for this card.

Can someone clarify where we stand with this card?
Has someone setup a Prefinal configuration to work with this card?
Who is up for some heavy testing and ultimately making a .deb package to solve everyone's issues once and for all.


d --

(This thread will be edited upon each solution to reflect the latest updates to its progress in order to avoid reading 10 pages of posts for no reason) ]]> BackTrack 4 NON working hardware dinopio http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28588-alfa-awus050nh-rt2870-injection-monitor-driver-bt4-pre-final.html ZTE MF 6__ modems http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28452-zte-mf-6__-modems.html Sat, 07 Nov 2009 12:32:33 GMT Can u please add support for ZTE, Huawei Wireless Internet dongles ? Can u please add support for ZTE, Huawei Wireless Internet dongles ? ]]> BackTrack 4 NON working hardware ainsi10 http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28452-zte-mf-6__-modems.html tp-link wn422g http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28352-tp-link-wn422g.html Tue, 03 Nov 2009 21:46:45 GMT ihave a tp-link wn422g usb wireless dongle. backtrack doesnt see it & i dont know how to make it work. my version of bt tells me that it doesnt have wireless extantions what to do? ]]> BackTrack 4 NON working hardware roybin http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28352-tp-link-wn422g.html BT4 on Lenovo Thinkpad T60(2007-55G) http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28153-bt4-lenovo-thinkpad-t60-2007-55g.html Thu, 29 Oct 2009 12:24:19 GMT Recently I install on my usb external hard drive BT 4 pre final. But neither LAN (Intel Gigaset 1000) or Intel Wifi 3945 ABG not detected. A link... Recently I install on my usb external hard drive BT 4 pre final.
But neither LAN (Intel Gigaset 1000) or Intel Wifi 3945 ABG not detected.
A link with a correct working driver for ati x1300 could be helpfull.

Thanq you!

Quote:
Originally Posted by dexter1983 (Post 159282)
Recently I install on my usb external hard drive BT 4 pre final.
But neither LAN (Intel Gigaset 1000) or Intel Wifi 3945 ABG not detected.
A link with a correct working driver for ati x1300 could be helpfull.

Thanq you!
Seems there are missing some files:
On boot mbprobe error , directory kernel 2.6.29 is missing.
I tried to manualy install intel wifi card 3945 ABG, no succes ]]> BackTrack 4 NON working hardware dexter1983 http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28153-bt4-lenovo-thinkpad-t60-2007-55g.html Error Installing Nvidia BFG GTS 250 http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28127-error-installing-nvidia-bfg-gts-250-a.html Wed, 28 Oct 2009 16:30:50 GMT Sorry for the double post I was not sure on how to remove the post so I added to it. Hahaha When you ask silly questions Its understandable... Sorry for the double post I was not sure on how to remove the post so I added to it.

Hahaha When you ask silly questions Its understandable that one would get no replies.

Running benchmark for at least 60 seconds...
CUDA/Device #1 'GeForce GTS 250': 6700.80 PMKs/s, 92.87% occupancy
CPU/Core (x86): 207.71 PMKs/s, 99.04% occupancy
CPU/Core (x86): 207.86 PMKs/s, 98.97% occupancy
CPU/Core (x86): 208.84 PMKs/s, 98.51% occupancy
Benchmark done. 7325.21 PMKs/s total.
root@blkE:/home/jon# ]]> BackTrack 4 NON working hardware tktipper http://forums.remote-exploit.org/backtrack-4-non-working-hardware/28127-error-installing-nvidia-bfg-gts-250-a.html Installing Nvidia 8400M GS in Backtrack 4 prefinal failed !! http://forums.remote-exploit.org/backtrack-4-non-working-hardware/27981-installing-nvidia-8400m-gs-backtrack-4-prefinal-failed.html Fri, 23 Oct 2009 18:37:52 GMT Hello every one I have a vaio sz770 nc . that has a Geforce 8400M GS . i want use that for cuda and WPA cracking I install backtrack 4 pre final... Hello every one
I have a vaio sz770 nc . that has a Geforce 8400M GS .
i want use that for cuda and WPA cracking
I install backtrack 4 pre final . I first use nvidia-driver but it fails and get a error dpkg return code 01 and these errors are shown :
"
ckage nvidia-driver is not configured yet.
cuda-sdk depends on cuda-toolkit; however:
Package cuda-toolkit is not configured yet.
dpkg: error processing cuda-sdk (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of gpu-md5-crack:
gpu-md5-crack depends on cuda-toolkit; however:
Package cuda-toolkit is not configured yet.
gpu-md5-crack depends on cuda-sdk; however:
Package cuda-sdk is not configured yet.
dpkg: error processing gpu-md5-crack (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
nvidia-driver
cpyrit-cuda
cuda-multiforcer
cuda-toolkit
cuda-sdk
gpu-md5-crack
"
( i use that after deactiving x server)
then i use envyng . but that failed too !
after that , i use nvidia installer that i download from nvidia site . i install that but show failed error .
when i start the backtrack in boot there comes a message that is installing nvidia but finally that failed . and when i use startx first Nvidia logo appear . but there is no information in /etc/X11/xorg.conf

thanks very much
sorry for weak english

hi
the problem is solved . i say the solution for every one that want to know .
because in Backtrack 4 prefinal you commonly are from another user . when you write sudo apt-get install nvidia-driver . a xorg.conf.new is created in /user/home directory but the apt-get ! search in /root/ !!!!
then you run the apt-get . then copy xorg.conf.new to /root/ directory and again run the apt-get install nvidia-driver . that's too simple
bye ]]> BackTrack 4 NON working hardware soheilvb http://forums.remote-exploit.org/backtrack-4-non-working-hardware/27981-installing-nvidia-8400m-gs-backtrack-4-prefinal-failed.html <![CDATA[Possible solution for broadcom-sta [BCM4312 BG] fail?]]> http://forums.remote-exploit.org/backtrack-4-non-working-hardware/27951-possible-solution-broadcom-sta-bcm4312-bg-fail.html Thu, 22 Oct 2009 14:51:34 GMT Been working on this damn problem about 3 hours and still no result!

System:
HP mini 2140, BCM4312 b/g rev 01 , kernel 2.6.30.7

I guess I've checked almost all google results related to this case. To quickly note the problem I should say that for some unknown reason b43 driver (loaded as b43-pci-bridge)is forcefully loaded, even after cleanly installing 'wl'.
Do not mention blacklisting tips nor re-compile/installing wl since I've tried every possible situation.
Now I`ve came to this point that, at least in BT4, blacklisting the b43 is NOT applied. I've tried multiple blacklist file names ( /etc/modprobe.d/blacklist OR blacklist.conf OR blacklist-bcm43)
,trying to blocking bcm43xx/ssb/b43/b44/ndiswrapper/b43legacy with no luck. still :
Quote:
*-network
description: Network controller
product: BCM4312 802.11b/g
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:08:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=b43-pci-bridge latency=0
dmseg have no usefull information :
Quote:
dmesg |grep -e wl -e b43
b43-pci-bridge 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
b43-pci-bridge 0000:08:00.0: setting latency timer to 64
wl: module license 'unspecified' taints kernel.
Recompiling 2.6.30.7 & building fresh kernel-headers from scratch, followed by compiling wl driver from source and inserting the new module to kernel looks working fine, but no success loading wl at end.

After removing all b43 & other blacklisted modules and even renaming related .ko files , b43-pci-bridge still loads from no-where and catch the hardware before wl loads. fail again

depmod, depmod -a & depmod 2,6,30.7 or 'update-initramfs -v -u all' has been tried after replacing and removing drivers. fail again




what make this harwdare non-working :
b43-pci-bridge is always loaded BEFORE wl get the chance to catch hardware, so, it fails and you won`t have it working. While card hardware is known by lshw, it`s not detected by driver, so no interface is created.

possible solution:{you tell me!}
please show me how to completely get rid of b43 and won`t have it automatically loaded, considering all of my non-working efforts to blacklist it (and other broken drivers)...
blocking b43-pci-bridge will let wl take control of the card, and it would hopefully work.

Thanks God that I've my Ubiquity card and not locked down by this problem hardly. ]]> BackTrack 4 NON working hardware strcpy http://forums.remote-exploit.org/backtrack-4-non-working-hardware/27951-possible-solution-broadcom-sta-bcm4312-bg-fail.html