Simple check for proper injection

[bigugly]

Originally Posted by Tossil

"Next, in a fresh konsole or xterm window, type: aireplay -0 10 -a 00:00:00:00:00:00 DEVICE . This command will broadcast 10 deauth frames to a nonexistant AP. If all goes well the deauth packets should show up in the ethereal capture frame."

As stated above, entering 00:00:00:00:00:00 gave me that error. So I entered 00:11:22:33:44:55 and did not get the error I had gotten before.

After doing that, nothing came up in Ethereal, so I assume my wireless card is not injecting anything. Oh fun.... At least I know one thing thats giving me problems now. Thanks for the help.

when capturing with ethereal try selecting ath0raw you should see the deauth packets then

[Nav2k6]

Originally Posted by bigugly

when capturing with ethereal try selecting ath0raw you should see the deauth packets then

In ethereal i dont see an option to select ath0raw

Im using a DWL-G650 rev C3 F/W 4.11 Atheros Chipset

[xz123]

If I do try this as described, I don't seem to sniff anything with ethereal.
If I disable the filter, I receive some packets. Are those still deauth-packets, or not?
I use a z-com 325HP+ in hostap-mode, wlanng doesn't work.

[Pinni3]

i have tryd to follow the guide to crackin WEP , it seems to work fine but in aircrack its not working , so i tryd this guide end the weard thing is i get is Malformd Packet i quote ethereal [Malformed Packet : Prism]
is this correct ??? i just don't know .

o , i didnt understand why aircack wont find the key i got 1900000 IV's and the cap file was over 500 Megs ??? the key was a 128 bit key maybe not the right post but hey just pasting it in

sorry for the poor English

Greets Pinni3

[xz123]

/edit
whoops, bullshit. sorry.

[itsme]

Originally Posted by Pinni3

i have tryd to follow the guide to crackin WEP , it seems to work fine but in aircrack its not working , so i tryd this guide end the weard thing is i get is Malformd Packet i quote ethereal [Malformed Packet : Prism]
is this correct ??? i just don't know .

o , i didnt understand why aircack wont find the key i got 1900000 IV's and the cap file was over 500 Megs ??? the key was a 128 bit key maybe not the right post but hey just pasting it in

sorry for the poor English

Greets Pinni3

I have the exact same problem as you have! But still no solution. I use a Senao 2511CD Ext2 card.
Can anybody help us out here?

[itsme]

This is really amazing

I have a ralink card on my desktop that works great on backtrack II, including injection (verified this with ethereal)

So, i started daouid's airoscript and collected 1,8 million IV's, started up Aircrack on my AMD Athlon 3800+ X2 (dualcore) desktop, but after one hour of cracking....no key found I even indicated that it is a 128 bit wep key....

So tell me.... Is my AP just uncrackable or what?

[kab3wm]

I have heard lots of people saying that injection works on the DWL-G122, but performing this test seems to indicate it does not inject. I'm getting the malformed error as well. I have tried two different DWL-G122's that I own. Both do the same thing.

[Toolio]

uh, any advice on how to run this test with WireShark? Is it still even viable with BT 2? Thanks for any pointers.
Peace

[itsme]

Originally Posted by Toolio

uh, any advice on how to run this test with WireShark? Is it still even viable with BT 2? Thanks for any pointers.
Peace

1) Put your card in monitor mode.

2) Start ethereal (or wireshark in BT 2) to listen on the card you want to test for injection, and add display filter wlan.fc.type_subtype == 12

3) Open xterm and start aireplay. aireplay-ng -0 10 -a 01:02:03:04:05:06 YOURCARD

Normally the deauth packets should show up in the ethereal capture frame. If not, you card is not injection. If you have MALFORMED PACKETS then injection does not work properly.